Slate nails are devoted to fix slat and other roofing materials

Slate nail is also a type of building nail, but slate nail cap has larger diameter and it is not the one with the pin nail. The nails are made of low carbon steel wire, and extra head cap made from galvanized thin sheet. This cover is ideal for protecting the product from moisture, so it is very actively used by various construction companies and not only.

Sometimes the entire nail is covered with a rust inhibitor. Slate nails are used to fix slate, corrugated board and other flat roofing materials to wood substructures. The bottom of the cap is semicircular, to maximize the fit to the slat hole.

Slate nails made of low carbon steel wire with extra galvanized head cap

Slate nails used to fix slat and other roofing materials

The size and weight of the slate nails

The greatest demand for slate nails with a diameter 4mm or 5mm, at the same time the most requested length is 90mm, 100mm, and 120mm

Our slat nails size varies from 70mm to 120mm, when you select nails the length depending on the amount of slate ridge height and thickness of the sheathing boards.

Size (mm)	Nail diameter (mm)	Nail length (mm )	Head Diameter (mm)	Weight kgs/1000 pcs
2.0 × 20	2	20	7.0-8.0	0.608
2.0 × 30	2	30	7.0-8.0	0.854
2.0 × 35	2	35	7.0-8.0	0.977
2.5 × 20	2.5	20	9.0-10.0	0.99
2.5 × 25	2.5	25	9.0-10.0	1.241
2.5 × 30	2.5	30	9.0-10.0	1.376
2.5 × 32	2.5	32	9.0-10.0	1.453
2.5 × 35	2.5	35	9.0-10.0	1.568
2.5 × 25	2.5	25	7.0-8.0	1.083
2.8 × 35	2.8	35	8.0-9.0	1.841
2.8 × 20	2.8	20	10.0-11.0	1.218
2.8 × 25	2.8	25	10.0-11.0	1.535
2.8 × 30	2.8	30	10.0-11.0	1.777
2.8 × 32	2.8	32	10.0-11.0	1.798
2.8 × 35	2.8	35	10.0-11.0	2.018
2.8 × 40	2.8	40	10.0-11.0	2.26
2.8 × 45	2.8	45	10.0-11.0	2.426
2.8 × 50	2.8	50	10.0-11.0	2.74
2.8 × 55	2.8	55	10.0-11.0	2.909
4.0 × 90	4	90	11.5-12.5	9.58
4.0 × 100	4	100	11.5-12.5	10.56
4.0 × 120	4	120	11.5-12.5	12.54
5.0 × 90	5	90	12.0-14.5	-
5.0 × 100	5	100	12.0-14.5	-
5.0 × 120	5	120	12.0-14.5	13.92

Package: cardboard boxes 25kg, or wooden box 30kg.

Sever Tips for you:

By means of a rubber gasket is placed under the nail head can provide even more protection from the slate roof with their hands from moisture.
The length of slat nails should be 10mm greater than the sum of slate ridge height and thickness of the sheathing boards.
The nail should be hammered for slate in a wave of slate, in order to prevent the penetration of rain water on a nail on the board sheathing.

Contact

Welcome you to visit our website. If you are interested in our products or have any questions, please fill out the following form and we will have someone to help you. (Marked with an asterisk * are required fields)